ENG 
English
EspañolUV LED Nail Lamp is a professional nail tool, widely used in nail salons and personal home nail art. It uses ultraviolet (UV) and LED light sources to quickly dry nail polish and make nail art more durable and beautiful. When using UV LED Nail Lamp, the correct operation steps are essential to help users achieve the desired nail effect.
Preparation
Before starting to use UV LED Nail Lamp, users need to prepare. First, prepare all the required nail products, including base coat, nail polish, top coat, etc. In addition, you need to prepare the UV LED Nail Lamp itself, wipes, sunscreen and other auxiliary tools. Before using UV LED Nail Lamp, it is recommended to apply a layer of sunscreen on the skin of your hands to protect the skin from UV damage.
Apply nail polish
After completing the preparation, apply the base coat first, and then apply the desired nail polish color. Make sure that the nail polish is evenly applied to the surface of the nail, and avoid applying it too thick or too thin. When applying nail polish, be careful to avoid the nail polish overflowing onto the edge of the nail or onto the skin, so as not to affect the nail effect.
Put in UV LED Nail Lamp
After applying nail polish, put your hand in the light box of UV LED Nail Lamp and make sure that your nails are fully exposed to the light source. Normally, the drying time of nail polish is 5-10 minutes, depending on the type and thickness of nail polish.
Start the drying process
Press the switch button on the UV LED Nail Lamp to start the drying process. The UV LED light source starts working and shines on the surface of the nail to help the nail polish dry quickly. During the drying process, you can shake your hand appropriately to ensure that the light shines evenly on each nail.
Complete the drying process
After the drying time is over, the UV LED Nail Lamp will automatically turn off, indicating that the drying process is complete. Take out your hand and check the drying of the nail polish. If the nail polish is not completely dry, you can restart the drying process until it is completely dry.
Apply topcoat
After the nail polish is completely dry, you can apply topcoat to increase the gloss and protect the nails. After applying the topcoat, put it in the UV LED Nail Lamp again to dry, ensuring that the topcoat is completely cured, making the manicure more durable and bright.
